2GIG – Thin Door/Window Contact

  • Thin Door & Window Contact Front View
SKU: 2GIG-DW10-345
345 MHz

The 2GIG Thin Door/Window Contact is a sensor device which detects the status of doors, windows, or any other objects that are opened or closed. It functions as a transmitter of signals and communicates with other devices and the control panel with its frequency of 345 MHz.

The Thin Door/Window Contact has an external input which accepts any N/C dry contact products. Installation requires lithium batteries. A panel with a maximum 350 feet area dimension can still work with this sensor-embedded product.

Thin Door/Window Contact Features:

  • ¾” wide sensor
  • Internal and external supported
  • Fully supervised
  • Uses a rare earth magnet
  • Connect with the 2GIG Alarm System


Technical Specifications
Power Source Two (2) Panasonic CR2032, or equivalent Lithium batteries
Magnet Dimensions (LxWxH) 1.3 x 0.435 x 0.312 in. (3.3 x 1.1 x 0.79 cm)
Sensor Dimensions (LxWxH) 2.59 x 1.03 x 0.49 in. (6.58 x 2.62 x 1.24 cm)
Weight (including battery & magnet) 1. 1 oz. (31.2 g)
Housing Material ABS plastic
Color White
Operating Temperature 32° to 120°F (0° to 49°C)
Relative Humidity 5-95% Non-Condensing
Wireless Signal Range 350 ft., open air, with 2GIG Wireless Alarm Control Panel
Code Outputs Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery
Transmitter Frequency 345.000 MHz (crystal controlled)
Transmitter Frequency Tolerance ± 15 kHz
Transmitter Bandwidth 24 kHz
Modulation Type Amplitude Shift Keying—On/Off Keying (ASK-OOK)
Unique ID Codes Over one (1) million different code combinations
Supervisory Interval 70 minutes
Peak Field Strength Typical 36,000 uV/m at 3m
External Input Sampling Current 20 uA
External Input Accepts N/C dry contact devices
Reed Switch Magnetic Sensitivity 10 to 20 amp turns
Reed Sensitivity 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical
Magnet Type Rare earth
Regulatory Listing(s) ETL, FCC Part 15, Industry Canadav
Included Accessories Two (2) Phillip’s flat-head screws, one (1) two-pin connector with a 12” flying 2-wire lead, adhesive strip
Warranty* Two (2) years

How To Install 2GIG Thin Door/Window Contact (Link Interactive)

2GIG-DW10-345 - GC3 Programmnig Entry 1

How to Replace Batteries in a 2GIG-DW10-345 Thin Door Window Contact

How to Add a 2GIG Thin Door/Window to a Go!Control Panel as a Window

Learning in Your 2GIG Thin Door/Window Contact (2GIG-DW10-345) as a Door

2GIG DW10: Go!Control Programming

There are no reviews yet.

Be the first to review “2GIG – Thin Door/Window Contact”

Your email address will not be published. Required fields are marked *