Security

2GIG – CO Detector Wireless Carbon Monoxide Alarm

  • 2GIG Carbon Monoxide Detector and Alarm with tamper-protected case.
2GIG
SKU: 2GIG‐CO3‐345
345 MHz

The 2GIG CO Detector, Wireless Carbon Monoxide Alarm is designed to alert the user through its sounder electrochemical carbon monoxide detector. It has a sounder with 85 decibels, which immediately alerts user upon detection.

This Wireless Carbon Monoxide Alarm is tamper protected which protects it against damage. With a 385 MHz frequency rate, it immediately sends alarms and also a low battery status to the system control. This further notifies the user if it is still functional or not.

CO Detector, Wireless Carbon Monoxide Alarm Features:

  • Connect with Go Control panel wirelessly
  • Battery-powered with low battery indicator
  • With a built-in sounder ranging to 85 decibel
  • Tamper-protected case
  • Full monitoring of device status
  • Embedded with end-of-life detector
  • Sensor lifespan up to 5 years
Technical Specifications
Power Source One 3‐volt CR123A Panasonic Lithium battery
Gas Detected Carbon monoxide
Audible Signal (temp 4 tone) 85 dBA min. in alarm at 10 ft. (3m)
Operating Current 10 µA
Temperature Range 40° F (4.4° C) to 100° F (37.8° C)
Operating Humidity Range 15% to 95% Relative Humidity, non‐condensing
LEDs 3 (green, yellow, red)
Agency Listings UL Standard 2075, UL 2034 and CSA 6.19‐01
Indoor Use Yes
Outdoor Use No
Compatible With 2GIG Go!Control Panel, wireless alarm systems
UPC 093863118104

2GIG-CO3-345 - How to Change the Battery?

2GIG CO3-345 Carbon Monoxide Detector Battery Replacement

2GIG Smoke & Heat Detector Carbon Monoxide Go!Control Panel

2GIG-C03-345 - 2GIG GC3 Programming

2GIG CO3-345: Go!Control Programming

There are no reviews yet.

Be the first to review “2GIG – CO Detector Wireless Carbon Monoxide Alarm”

Your email address will not be published. Required fields are marked *