Automation > Remotes > Keypad

The Aeon Labs Z-Wave Minimote Remote Control is a 4-button control for Z-Wave devices. The controller can turn on or off all devices, and it can also be setup to create scenes. It also remotely dims or fully brightens any device. The Minimote can be setup as a secondary controller. Once setup this way, it […]

Add any product to the watch list, or create your own

     

The Aeon Labs Z-Wave Minimote Remote Control is a 4-button control for Z-Wave devices. The controller can turn on or off all devices, and it can also be setup to create scenes. It also remotely dims or fully brightens any device. The Minimote can be setup as a secondary controller. Once setup this way, it […]

Add any product to the watch list, or create your own

     

Create and manage custom lighting scenes without the hardwired mess. Mount using double-sided tape for a quick and easy installation. Control up to four groups and four scenes with this low profile wall plate. Easy-to-read soft touch buttons produce an ambient LED amber glow when pressed for command confirmation.

Add any product to the watch list, or create your own

     

If you have a Linear access control product, you need an ACT-31B 1-channel block coded key ring transmitter from North Shore Commercial Door. This transmitter operates using the MegaCode format, so it’s factory-programmed with one of more than 1,000,000 codes; the receiver learns the code, and that means nobody can gain access by reprogramming it.

Add any product to the watch list, or create your own

     

The model D-22A 1-channel, 1-button handheld transmitter is a single-channel transmitter normally used as a “panic button” in security systems. It is also used in many remote switching applications where a portable transmitter is required. Each transmission causes the red led indicator on the front of the transmitter to light, showing that the transmitter is […]

Add any product to the watch list, or create your own

     

The Model D-22B 2-Channel, 2-Button Handheld Transmitter is a two-channel transmitter that can initiate two separate functions. It is used in many remote switching applications where a portable two-channel transmitter is required. The first digit of the digital code sent will be off or on depending on which transmitter button is pressed. Each transmission causes […]

Add any product to the watch list, or create your own

     

The Model DT-4A 4-Channel Visor Transmitter is a wireless radio control designed for use with automatic garage/gate operators and access control systems. The transmitter can be used with one four-channel receiver (DR4), two two-channel receivers (DR2) or four single-channel receivers (DR, DRQP or DRM).

Add any product to the watch list, or create your own

     

The DXT-23 3-Button, 4-Channel Handheld Transmitter is a battery powered portable transmitter designed for use with Linear’s DX Format receivers. Each transmitter can be used in a limitless number of wireless remote control applications. Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver.

Add any product to the watch list, or create your own

     

The DXT-25 5-Button, 8-Channel Handheld Transmitter is a battery powered portable transmitter designed for use with Linear’s DX Format receivers. Each transmitter can be used in a limitless number of wireless remote control applications. Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver.

Add any product to the watch list, or create your own

     

The Model MDKP Exterior Wireless Keypad can transmit a unique signal for each 1-6 digit PIN code entered. It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions. Access codes are programmed into the access controller or receiver, the maximum number of codes possible depends on the receiver model used. To operate […]

Add any product to the watch list, or create your own

     

This Linear HAE00001 garage door opener three-button wall station is designed for Linear models LD033, LD050 and LS050. The HAE0001 requires two wires to run to your garage door opener, and it’s the perfect replacement for a doorbell-style button. You can use this garage door wall station to control the door and the light on […]

Add any product to the watch list, or create your own

     

The Delta-3 DTKP Keypad Transmitter is one of Linear’s series of wireless radio controls designed for use with automatic garage door and gate operators. The Delta-3 radio format provides 256 different codes.

Add any product to the watch list, or create your own

     

The Model 420001 Wireless Keypad is a weather-resistant keyless entry station transmitter. Entering a programmable 4-digit access code sends the programmable radio code to the receiver to activate the door or gate operator. The transmitter is powered by a 9-volt battery, has a test/operate indicator, and keys that light during use. When the battery gets […]

Add any product to the watch list, or create your own

     

The Insteon Dimmer 8-Button Keypad is a wall switch that remotely controls up to eight (8) individual home devices and home lighting scenes. It uses dual-band Insteon technology. It features a Main On/Off button and seven (7) scene buttons. This keypad requires dimmable bulbs and a neutral wire for installation. This Dimmer 8-Button Keypad automates […]

Add any product to the watch list, or create your own

     

The Insteon Dimmer 6-Button Keypad remotely controls a minimum of six (6) individual home devices or home lighting scenes. It uses dual-band Insteon technology. This multi-in-one keypad is a combination of a remote control and wall switch. It features an on and off button, and four (4) scene buttons. The Dimmer 6-Button Keypad automates with […]

Add any product to the watch list, or create your own

     

The Insteon On/Off 6-Button Keypad is a scene controller, a heavy 20A switch, and a signal repeater. It uses Insteon’s dual-band technology. You can use this keypad to create whole-home lighting scenes. It is also an energy-saving device as it supports voltages from 120 to 277V. The keypad features on, off, and scene A, B, […]

Add any product to the watch list, or create your own

     

The Eaton RFWC5WS ASPIRE RF 120-Volt Wall Mount 5-Scene LED Keypad serves as a flush-mounted device for activating up to (5) “scenes” or “zones” by manually pushing one of the (5) buttons on the face of the device. This LED scene keypad has buttons for turning individual scenes both on and off. Each individual scene […]

Add any product to the watch list, or create your own

     

The X10 ScanPad Ninja Pan Tilt Remote Control gives the user the control of switching position of an XCam2 Camera in the Ninja Pan and Tilt camera base. The user can view up to four video cameras and switch them with this device. It can also program positions of the camera for viewing assistance. Activation […]

Add any product to the watch list, or create your own

     

This XPT unit is a Wall Mounted X10 Controller / Transmitter. The XPT Base Unit comes with the XP1-W-NS faceplate and will turn on and off 1 X10 code. The XPT is mounted into a standard single-gang wall box and the Keypads are plugged onto the face of the base unit. The XPT Base Unit […]

Add any product to the watch list, or create your own

     

The X10 Wall Transmitter with Four Button Keypad is a wall transmitter used for the on/off control of four (4) receiver modules on the powerline. Install this device on a single-gang wall box with a base unit where keypads are attached. Hitting one side of the rocker switch turns the transmitter on, while the other […]

Add any product to the watch list, or create your own

     

This is a KeyPad  for the X10 XPT Wall transmitter unit. To utilize this keypad you must have the XPT unit. You can find it HERE.

Add any product to the watch list, or create your own

     

This is a KeyPad for the X10 XPT Wall transmitter unit. To utilize this keypad you must have the XPT unit. This KeyPad has 1 ALL ON/ALL OFF Button.

Add any product to the watch list, or create your own

     

This keypad attaches to the front of an X10 PRO Wall Transmitter Base Module (XPT, sold separately) to create a custom X10 wall switch. Once installed, the keypad sends All Lights On/All Units Off commands to every X10 receiver set to the same House Code.

Add any product to the watch list, or create your own

     

Ivory X10 Kaypad new version is Automation product that you can use in your home. Has 2 ON and OF Buttons and to utilize this keypad you must have the XPT unit.

Add any product to the watch list, or create your own

     

The X10 New Style 4 Button Keypad, 3 On/Off, 3 Sequenced Codes, 1 Dim Control, White XP2D Version A utilizes four buttons to transmit commands. It uses three serial commands for on and off functions. It also uses the last command for dimming abilities. This X10 New Style XP2D Version A uses keypads intended to […]

Add any product to the watch list, or create your own

     

This is a KeyPad for the X10 XPT Wall transmitter unit. To utilize this keypad you must have the XPT unit. This KeyPad has 4 On and Off Buttons.

Add any product to the watch list, or create your own