Automation > Automation Misc.

The 2GIG GC3 AT&T CellSled Cell Radio utilizes an AT&T network to function. It can allow a limitless connection if the AT&T network is in an excellent connection. It offers a two method speech communication that can adjust to any alarms. This cellular radio provides an advanced safety system feature. This GC3 AT&T CellSled Cell […]

Add any product to the watch list, or create your own

     

The Zipato Micro Module Energy Meter measures the total energy consumption of any products or appliances connected to it. The Z-Wave technology allows the Energy Meter to automate and then send report readings to the Zipato control panel or other Z-Wave-enabled controllers. It provides dual functioning as well as a small, compact size. With the […]

Add any product to the watch list, or create your own

     

The Aeon Labs Z-Wave Home Energy Meter helps conserve energy and can monitor energy consumptions at real-time. This Energy Meter installs onto a circuit board. The kit provides installation instructions to the device for first timers. Users can adjust their devices to save energy using the data sent to the control panel by the Energy […]

Add any product to the watch list, or create your own

     

Features. Z-wave Plus technology – better range faster data transmission. Plugin. No more wires. No more expensive installations. Setting up Siren couldnt be simpler. Select where you want it to be in your home and plug it in to a power outlet.. Up to 106dB. Siren has to immediately alert you to emergencies and safety […]

Add any product to the watch list, or create your own

     

Save energy, save money and feel secure. GE Outdoor Dusk-to-Dawn Light Sensing Timer delivers convenient automation for security, landscape, patio and seasonal lighting. Controls two lights or other devices. Easy-to-use timer features dusk-to-dawn cycle allowing you to turn lights off two, four, six or eight hours after dark. Water-resistant and wind-resistant design makes the GE […]

Add any product to the watch list, or create your own

     

Use timers to reduce power usage and save more energy dollars.­­ Simply turn the dial to stay on up to 60 minutes. Perfect for lights, exhaust fans, heaters or pumps. *Wall plate not included. This indoor in-wall auto shut-off spring wound timer is easy to install and easy to use. Counts down to shut off […]

Add any product to the watch list, or create your own

     

This 24-Hour Indoor Heavy Duty Mechanical Water Heater Time Switch is ideal for use with fans, pumps, water heaters, AC, and more! Its heavy-duty, metal construction and lockable, tamper-resistant metal case make this timer durable. The Time Switch is easy to install with its 3/4 ” knockouts. Easy to set, and it includes a manual […]

Add any product to the watch list, or create your own

     

Save energy, save money and feel secure with the Heavy-Duty Outdoor Timer from GE. Delivering convenient automation for your outdoor security, landscape, patio and seasonal lighting, the timer turns on and off at desired times daily and features a 24-hour daily programmable cycle. Equipped with one grounded outlet, the easy-to-use timer reduces the operation time […]

Add any product to the watch list, or create your own

     

Use timers to reduce power usage and save more energy dollars.­­ Simply turn the dial to stay on up to 60 minutes. Perfect for lights, exhaust fans, heaters or pumps.

Add any product to the watch list, or create your own

     

The Fortrezz Wireless Z-Wave Water Valve features a valve which allows the user to turn ON/OFF the water system remotely. This feature supports Z-Wave technology known for automating home devices. This valve also detects any signs of water leakage. As soon as water is detected, the water system shuts down. Accordingly, this Wireless Z-Wave Water […]

Add any product to the watch list, or create your own

     

The HAC01 Wireless In-Wall Remote Module by Everspring is a remote component that allows Z-Wave devices to work with its network. It is designed to fit into the interior of the wall box, giving room for switches to suit as well. Two functions are involved in this component, namely: to trigger the devices to work […]

Add any product to the watch list, or create your own

     

The Fortrezz MIMOlite is an interface module which is supported by Z-Wave technology. It can transform one digital or analog input to a dry contact relay output. This procedure is also applicable to a Z-Wave message input converted to a Z-wave message output. The MIMOlite can control motorized shades, gates, garage doors, as well as […]

Add any product to the watch list, or create your own

     

Stop water damage caused by leaking or broken pipes and hoses from washing machines, ice makers, toilets, water heaters, etc. The ELK-WSV2 is a new and improved model of our highly popular electric water shutoff valve. It’s designed for residential and light commercial use, and now includes a manual override handle. This valve can be […]

Add any product to the watch list, or create your own

     

Multi-purpose cabinet for structured wiring, controls, & peripherals. Versatile mounting for multiple manufacturer’s structured wiring modules; such as Leviton, OnQ, OpenHouse, and others. May be flush or surface mounted. Flush mounting is ideal for hollow frame walls with studs on 16” centers. The minimum rough opening is 14.25” wide, 28.25” high, 4.5” deep. Can be […]

Add any product to the watch list, or create your own

     

A Great, Space Saving Mounting Option! Pack of 2 board glides for mounting of Security and Automation Controller boards.

Add any product to the watch list, or create your own

     

For attaching M1 expansion boards and other manufacturer’s boards to the ELK-SWP3 and ELK-SWP4 Plates.

Add any product to the watch list, or create your own

     

3″ Adapter plate for mounting components, boards and devices into ELK Structured Wiring Enclosures

Add any product to the watch list, or create your own

     

The iPort Charge Case and Stand for iPad Mini protects an iPad while charging. It offers six different mounting orientations. It charges without using any wire. This product permits charging even in landscapes or portrait placements. The Charge Case and Stand for iPad Mini has a soft trace black touch. It accepts an Apple Smart […]

Add any product to the watch list, or create your own

     

The iPort Charge Case and Stand for iPad Air 1, Pro 9.7″ protects iPads by enclosing it with the charge case and docks onto the charging stand. The case mounts the iPad in six different orientations. Mounting and charging of the iPad in various locations of the house or working place can be done using this equipment. […]

Add any product to the watch list, or create your own

     

The iPort Charge Case and Stand for iPad Air 1, Pro 9.7″ protects an iPad while charging. It offers six different mounting orientations. The Charge Case and Stand accepts an Apple Smart Cover. It has a removable lightning module that gives access to the iPad’s lightning port for charging. Simply drop the charge case to charge […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort WallStation installs on a surface to hold an iPad securely. It works with an iPad Sleeve allowing wireless charging of the iPad. The WallStation provides a home base for the iPad for easy usage. An iPad mounted in the LaunchPort WallStation provides the user an information center, gallery, as well as video conferencing […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort WallStation installs on a surface to hold an iPad securely. It works with an iPad Sleeve allowing wireless charging of the iPad. The WallStation provides a home base for the iPad for easy usage. An iPad mounted in the LaunchPort WallStation provides the user an information center, gallery, as well as video conferencing […]

Add any product to the watch list, or create your own

     

The iPort Charge Case and Stand, iPad 4th Gen, keeps an iPad fully protected. It performs with a magnetic system that mounts and dismounts an iPad easily. The case contains a removable module for lightning port access. It is compatible with the Apple Smart Cover. The Charge Case and Stand charges in landscape and portrait modes […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort BaseStation secures mounting of iPads on a tabletop. The iPad can rotate 360 degrees, allowing adjustment with any position when typing or tapping. This device consists of a docking station and an iPad sleeve. The BaseStation uses magnets which allow wireless charging. When charging, the BaseStation maintains the iPad’s functionality. Its finished aluminum […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort AM.5 Sleeve is a protective casing for iPads that mounts in a LauncherPort station in a wall or a table. It features magnets inside the sleeve that firmly holds the iPad and the LaunchPort station together. The sound wave from the iPad redirects towards the user, enhancing audibility. This design conforms with the iPad […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort AM.3 Sleeve is a protective casing for iPads that mounts in a LauncherPort station in a wall or a table. It features magnets inside the sleeve that firmly holds the iPad and the LaunchPort station together. The sound wave from the iPad redirects towards the user, enhancing audibility. This design conforms with the iPad 3rd […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort AM.3 Sleeve is a protective casing for iPads that mounts in a LauncherPort station in a wall or a table. It features magnets inside the sleeve that firmly holds the iPad and the LaunchPort station together. The sound wave from the iPad redirects towards the user, enhancing audibility. This design conforms with the iPad 3rd […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort AM.4 Sleeve is a protective casing for iPads that mounts in a LauncherPort station in a wall or a table. It features magnets inside the sleeve that firmly holds the iPad and the LaunchPort station together. The sound wave from the iPad redirects towards the user, enhancing audibility. This design conforms with the iPad […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort AM.2 Sleeve is a protective casing for iPads that mounts in a LauncherPort station in a wall or a table. It features magnets inside the sleeve that firmly holds the iPad and the LaunchPort station together. The sound wave from the iPad redirects towards the user, enhancing audibility. This design conforms with […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort AM.2 Sleeve is a protective casing for iPads that mounts in a LauncherPort station in a wall or a table. It features magnets inside the sleeve that firmly holds the iPad and the LaunchPort station together. The sound wave from the iPad redirects towards the user, enhancing audibility. This design conforms with […]

Add any product to the watch list, or create your own

     

The iPort LaunchPort BaseStation secures mounting of iPads on a tabletop. The iPad can rotate 360 degrees, allowing adjustment with any position when typing or tapping. This device consists of both a docking station and an iPad sleeve. The BaseStation uses magnets which allow wireless charging. When charging, the BaseStation maintains the iPad’s functionality. Its finished […]

Add any product to the watch list, or create your own

     

The iPort Control Mount for iPad Mini 1, 2, & 3 semi-permanently mounts an iPad Mini in a wall or various solid surfaces. With this, the iPad Mini acts as a digital screen or a smart home controller. It also includes a paintable bezel to blend the color of the frame into the installation environment. This […]

Add any product to the watch list, or create your own

     

The iPort Surface Mount System iPad Mini 4 mounts and charges the iPad on any surface. It is designed to keep the iPad hardware functions accessible in an installed bezel frame. It also serves as a digital signage screen or a smart home controller. The system offers flexible power supply options. This Surface Mount System […]

Add any product to the watch list, or create your own

     

The iPort Control Mount for iPad Air 1 & 2 semi-permanently mounts an iPad Air in a wall or various solid surfaces. With this, the iPad Air acts as a digital screen or a smart home controller. It also includes a paintable bezel to blend the color of the frame into the installation environment. This Control […]

Add any product to the watch list, or create your own

     

The Lutron Car Visor Clip for Pico Remote is an accessory integrated to the car’s sun visor. It enables accessibility of the Pico wireless remote around the clock even when inside the car. It securely houses one standard Pico remote control which is compatible with various Lutron products such as wireless dimmers and switches. It manages […]

Add any product to the watch list, or create your own

     

The Intermatic K121-30 Locking-type receptacle is ideal for using with photo control accessory. It has receptacle with 30-Inch leads. Adapter has voltage rating of 480 Volts and current rating of 15 Amps. It ideal for use with Intermatic photo controls. It has simple design that makes it ideal for custom installations or replacements of older […]

Add any product to the watch list, or create your own

     

A full line of thermal type photo controls and relay type photo controls provide “dusk-to-dawn” lighting control. The thermal type controls feature a cadmium sulfide photocell and sonic welded polycarbonate case and lens to seal out moisture. The design utilizes a dual temperature compensating bimetal and a metal film resistor for reliable long life operation […]

Add any product to the watch list, or create your own

     

This photo control shorting cap is designed for use with intermatic photo controls. It is designed to offer easy, plug-and-twist installation. It features a 3-prong, NEMA locking-type plug connection. It also offers delay action to eliminate load switching Off due to car headlights or lightning.

Add any product to the watch list, or create your own

     

Intermatic Swivel mount measuring 5 Inch x 4 Inch x 0.5 Inch is compatible with K4100, K4200, K4400 Series and 1/2 Inch 14 NPSM male thread device.

Add any product to the watch list, or create your own

     

The Intermatic K122 locking-type photo control accessory is a pole bracket adapter for use with Intermatic K1200, K4500 and LC4500 series locking type photocells and LED fixtures. It comes with 12-inch leads and will operate from 105 to 480 volts. The simple design makes this receptacle perfect for custom installations or replacements of older parts.

Add any product to the watch list, or create your own

     

The Russound ComPoint Hub acts as the center point for your communication and alert system. The ComPoint Hub is the brain of the system that connects the doorbells, door stations, as well as keypads. ComPoint works either with your Russound audio system or functions as an independent intercom communication system. It features up to seven […]

Add any product to the watch list, or create your own

     

The Smart Sprinkler 8ZULW-B Irrigation Controller by Rachio allows you to take full control of your home water system both manually or remotely. Used in managing your water system or as the replacement for your regular controller. This utilizes Yard Intelligence innovation that automatically analyzes water cycles to bring about adequate water thus lessens runoff. […]

Add any product to the watch list, or create your own

     

The Iro 8ZULWR Irrigation Controller by Rachio allows you to take full control of your home water system both manually or remotely. This product is programmable according to plant/soil types, and nozzles/sun exposure. Used in managing your water system or as the replacement for your standard controller. This utilizes Yard Intelligence innovation that automatically analyzes […]

Add any product to the watch list, or create your own

     

The add-a-wire accessory is a device for THERMOSTAT installation that allows the addition of a wire to help independent fan control regain functionality, even in a four-wire electrical system. AAW-311 is compatible with the one-link Wi-Fi THERMOSTAT models therm-500 and therm-500cp1. The Add-A-Wire™ accessory is a device that allows the addition of a wire to […]

Add any product to the watch list, or create your own

     

The WGL X10 RF Receiver Module is an RF to PC receiver which collects X10 RF commands to personal computers. The module manages X10 RF commands (dim, brighten, on, off, etc.) from motion detectors, keychain, remotes, as well as other devices. The signals transmit to a computer’s RS232 port. The Receiver Module helps improve signal […]

Add any product to the watch list, or create your own

     

The WGL X10 RF to USB PC Receiver Module acts as a receiver and transmitter of signals from X10 devices, including Palm Pad, Hawkeye motion detectors, keychain remotes, as well as much more. The module sends the signal to a computer RS232 or USB port. It also receives 256 code addresses with bright/dim, on/off, and direct mode […]

Add any product to the watch list, or create your own

     

The WGL Rain8net Pro2 RS232 Sprinkler Main Controller is an eight-zone sprinkler controller driven by an RS232 serial port. It has eight outputs connected to the on/off devices. Additionally, an automatic resetting electrical fuse protects the controller from overloading for upgraded performance. It also provides a LED to signify the system is performing well.  A […]

Add any product to the watch list, or create your own

     

The WGL Rain8II X10 Sprinkler Expansion Module (2-Way), an expansion controller for the Rain8II Sprinkler Module, allows users to control eight additional zones in the irrigation system remotely. X10-compatible computer interfaces, as well as other devices that can produce X10 Status Request commands, controls this module. The Rain8II X10 Sprinkler Expansion Module’s two-way capacity also controls […]

Add any product to the watch list, or create your own

     

The WGL Rain8net+ RS232 Sprinkler Expansion Controller provides control to eight irrigation zones. It also includes a 10004 web cable. Manage the controller through any Internet-enabled computer as well as other electrical devices. It uses a standard 24 volts. The Rain8net+ RS232 Sprinkler Expansion Controller expands the system in eight zones. However, the recommended use for the controller is only […]

Add any product to the watch list, or create your own

     

The WGL Rain8upb Pro UPB Sprinkler Controller, an 8-zone UPB controller module, serves as the central controller for irrigation control system. It directly activates 24VAC valves used for irrigation. The controller is used for automation either individually or in groups. The network supporting this device protects it from lightning as well as preventing valve overloading. The […]

Add any product to the watch list, or create your own

     

The WGL Rain8net Pro2 Sprinkler Expansion Module, operated by an RS232 serial port, expands any existing Rain8 Pro System. It likewise acts as a sprinkler controller module that enables eight additional zones. It can control as well as access irrigation system remotely from any Internet-enabled computer. The Expansion Module also provides two-way operation of individual […]

Add any product to the watch list, or create your own

     

The WGL Rain8net+ Sprinkler Main Controller indicates watering times (start and end schedule) of the automatic sprinkler system. The Sprinkler Controller operates wirelessly using an Internet connection by any PC as well as other automation controllers. The cable uses a standard 24V power to irrigation valves. It also carries needed data links. The module can […]

Add any product to the watch list, or create your own

     

The WGL Rain8upb Pro UPB Sprinkler Expansion Module, an 8-zone filter controller module, uses an RS232 serial port. It also features a self-adjusting electric fuse to protect the valve from overloading. This expansion module enables eight additional zones to operate with Rain8UPB Pro system. Additionally, it features LED lights which display the system status. This Rain8upb Pro […]

Add any product to the watch list, or create your own

     

The WGL Rain8upb Pro Sprinkler Controller is a computer-controlled irrigation module. The controller also features an input for linkage to a rain detector. A UPB system operates the controller with changes instantly directed to the UPB. The owner controls the sprinklers off using the UPB. Additionally, daisy-chain modules to create large installations. The Rain8upb Pro Sprinkler Controller […]

Add any product to the watch list, or create your own

     

The WGL Rain8II X10 Sprinkler Controller is an eight-zone irrigation controller which can execute an irrigation schedule. The irrigation system can be managed and controlled from a computer or the internet by a single X10 command or a unique X10 code set to each zone. The controller turns on/off the sprinklers, as well as sets […]

Add any product to the watch list, or create your own

     

The DSC Dual Phone Line with Optional IP Receiver SG-System I is a multi-format receiver designed for remote supervision and monitoring of fire and security alarm systems. It has a capacity to monitor 512 IP accounts. This can be connected to a USB port or Ethernet port on any computer running SG System Console software […]

Add any product to the watch list, or create your own

     

Just turn dial to stay on up to 60 minutes.

Add any product to the watch list, or create your own

     

The ELK-930 performs three functions. It can detect ring activation from one or two doorbell buttons and a single telephone line. It conveniently isolates the voltage and current and produces an open collector (pull to ground) output which can be used to trigger an automation controller, relay, timer, etc. The circuit is pre-scored so that […]

Add any product to the watch list, or create your own

     

PCS designed the PulseWorx Wire-In Noise Filter to reduce noise created on the existing powerline. Since the UPB protocol communicates over the existing powerline it is sometimes necessary to reduce noise caused by different devices. The most common devices to create noise are fluorescent lighting, pool pumps, or generators. The PulseWorx Wire-In Noise Filter acts […]

Add any product to the watch list, or create your own

     

The PCS PulseWorx Plug-In Powerline Filter reduces noise on the existing powerline caused by several different things such as pool pumps, fluorescent lighting, or generators. Noise on the powerline can affect communications between UPB devices. The PulseWorx Plug-In Powerline Filter loads should not exceed 15 amps. The filter features a rating for 120 Volt AC […]

Add any product to the watch list, or create your own

     

The PCS PulseWorx Plug-In Powerline Filter reduces noise on the existing powerline caused by several different things such as pool pumps, fluorescent lighting, or generators. Noise on the powerline can affect communications between UPB devices. The PulseWorx Plug-In Powerline Filter loads should not exceed five amps. The filter features a rating for 120 Volt AC […]

Add any product to the watch list, or create your own

     

The PCS Fixture Module Relay does not dim a load but only turns on/off with the relay. This relay is a good option for small motors, transformers, lighting, or any non-dimming applications. It has a 20 amp rating and should never exceed loads over 20 amps. The Fixture Module Relay utilizes UPB for the automation protocol […]

Add any product to the watch list, or create your own

     

The PCS Fixture Module Dimmer is a two channel wire-in fixture module for control of 120VAC lighting loads. The module receives and also transmits commands over the UPB protocol on the existing powerline. It can dim only incandescent lighting and controls fluorescent lighting only as on/off. This Fixture Module Dimmer is intended for indoor use […]

Add any product to the watch list, or create your own

     

The PCS Plug-In Output Control Module controls relays for gates, valves, garage doors, or anything else that uses a relay to trigger. The module uses UPB (Universal Powerline Bus) to communicate over the existing powerline. The Plug-In Output Control Module has two separate isolated class 2 contacts rated for eight amps. The module features 32 links […]

Add any product to the watch list, or create your own

     

The X10 Smart RF Repeater Module is for operating wider areas with any X10 RF signal. This product increases the range of X10 security and home automation merchandises such as wireless remote controls, motion detectors, and security sensors. Every X10 unit that works via RF Frequency can benefit from the RF Repeater, which lengthens the […]

Add any product to the watch list, or create your own

     

The X10 Wired-In Noise Filter is intended for noise generating appliances. This device blocks unwanted sounds generated by large appliances like hot tubs, air conditioners, and refrigerators. Displaying of signal increase notifies the user that noise from the devices are blocked and sent to the powerline with minimum intervention. Installing this device uses three wires […]

Add any product to the watch list, or create your own

     

The X10 Noise Reducer is for reducing the noise generated by non-X10 electronic devices. This device allows the transmission of X10 signals with less interference by attenuating power line signals above or below 120 KHz frequency. It shortens the power signals, creating a neutral AC. It helps minimize the effects of power line transients and […]

Add any product to the watch list, or create your own

     

The X10 Passive Blocking Filter is designed to eliminate the signals crossing from one household AC wiring to another. Installed between the meter and the breaker panel is a coupler or a blocker. It can install in one, two, and three phases. The filter efficiently joins X10 signals between the phases which eradicate crossing of […]

Add any product to the watch list, or create your own

     

The X10 Interface Module Transmitter is a one-way interface that is a cost effective way of pairing X-10 signals onto the AC power line. It is capable of connecting via modular RJ11 telephone jack and plugging into a regular AC outlet. The OEM manufacturer or private user define the interface cable, conferring to the specific […]

Add any product to the watch list, or create your own

     

The GE 4 Way Distributor Amplifier is perfect for TVs, antennas, AV receivers, video, cable and satellite receivers. 4.5 dB of gain increases your signal strength and provides better picture quality for your devices. The amplifier can be used with up to 4 devices with F-type connectors. Instructions are easy: First connect the incoming signal […]

Add any product to the watch list, or create your own